Doors, Gates & Trapdoors
All of these open with a redstone signal at any of their blocks, and breaking any part gives the whole piece back. The shared rules are on Building Pens.
Cage Doors
- A bar-filled door, 2 blocks tall.
- Stacking: a door placed on top of a door merges into one taller door; you can keep stacking. The whole stack opens together.
- Double doors: two doors side by side open together.
- Right-click: opens or closes it, like a vanilla door.
- Pitch: 0.9–1.0.
- Drops: 1 door (breaking the top half also gives it back).
The result takes on the wood you use.
Small Gates
- A solid swinging gate, 2 wide × 4 tall, twice as thick as a door.
- Placing:
- The hinge goes where you click, and the gate reaches to your right.
- A matching gate placed right beside it mirrors it, making a double gate that opens together.
- It needs the full 2 × 4 space clear.
- Opening:
- Right-click (or redstone) swings the leaf 90° away from where you stood when placing it.
- The space in front must be clear.
- Sound pitch: 0.75–0.85.
- Drops: 1 gate. Only the hinge-side bottom block drops it, but breaking any part gives it back.
Any planks; the result takes on the wood you use.
Large Gates
- Same as the Small Gate, but 3 wide × 7 tall.
The result takes on the wood you use.
Portcullis
- Size: a gateway 7 wide × 18 tall.
- Opening: about 6.75 blocks clear between the side guides and 17 blocks up to the header. That's big enough for the largest Brachiosaurus, including one with rare size genes.
- Placing: it's placed with its middle where you click, and needs the whole 7 × 18 space clear.
- Right-click any part raises or lowers the grid. Raised, only the side guides and header stay solid.
- Sounds: piston extend/contract plus the material's door sound (volume 2.0, pitch 0.5).
- Drops: 1 portcullis. Only the bottom-middle block drops it, but breaking any part gives it back.
The result takes on the wood you use.
Cage Trapdoors
- Wooden Cage Trapdoor 1×1 (guardasure:wooden_cage_trapdoor_1x1), 1×3 (…_1x3), 3×3 (…_3x3), 3×9 (…_3x9).
- Metal Cage Trapdoor 1×1 (guardasure:metal_cage_trapdoor_1x1), 1×3, 3×3, 3×9.
- Shape: a hatch of cage bars in a frame, lying flat at the top of the block, like Horizontal Cage Bars.
- Size names: "1x3" means 3 blocks along the hinge and 1 out from it.
- Placing:
- Click the side of a block: the hatch hinges on that edge and reaches out from it, centred on the click.
- Click a top face: it's centred there, reaching away from you, hinged along its far edge.
- The hinge runs along the long side.
- Right-click (or redstone): the whole hatch swings up to stand on its hinge edge, so a 3×9 opens into a wall only 3 tall. The space above the hinge row must be clear.
- Joining: when shut, flat bars beside it join it, and walls and frames get a beam reaching over.
- Sound pitch: 0.8–0.9.
- Drops: 1 hatch. Only the left hinge-row block drops it, but breaking any part gives it back.
The result takes on the wood you use.
The result takes on the wood you use.
The result takes on the wood you use.
The result takes on the wood you use.
Picture to add: the Portcullis raised over a Brachiosaurus
Last updated November 15, 2026